샂땲뵲
뀒봽濡
뒪꽣뵒 뒳由щ툕
CPS SEAL
CARCO OIL SEAL & V-PACKING
뀒봽濡 罹≪뒓 삤留
띁뵆濡쒕줈 삤留 KARLEZ 쓳뭹
뵲留 肄ㅽ뙆슫뱶
硫붿뭅땲移 뵲 쁺援 VULCAN 젣뭹 OEM슜 뵲
湲고 痍④툒긽뭹
 
   
   


Teflon Encapsulated seals

The best Supplier of "Teflon Encapsulated O-Ring"
주식회사 한팩은 테프론 캡슐 오링의 전문 수입업체로서, 지난 30여년간의 풍부한 경험과 Know-how, Network로 최상의 품질과 최적의 가격,
납기를 제공해 드리고 있습니다.
테프론 캡슐 오링(Teflon Encapsulated O-Ring)은 우주항공, 반도체, 석유화학산업뿐만 아니라 일반 산업의 넓은 분야에 응용이 가능한 오링
입니다. FEP, PFA TUBE안에 내부 탄성체 Silicone, Viton®, EPDM, Stainless Steel Spring의 탄성체 오링을 넣어 완전 밀봉 처리하여 탄성을
준 제품으로 모든 화학약품과 폭넓은 온도(-250℃ ~ +260℃)에 사용 가능합니다.
내열성 : 폭넓은 온도 범위(-250℃ ~ +260℃)에 사용 가능합니다.
폭넓은 규격 : AS568 Series, P Series, G Series, Inch Size, m/m Size의 비규격 Size 제작(from C.S 1.50m/m ~ to C.S 31.75m/m)이
                       가능합니다. 아래 비규격 생산 가능 규격표를 참조 바랍니다.
비규격 생산 가능 규격표
Cross
Section
A


mm
Nominal
Squeeze
S
Groove
Depth
D
Grrove
Width
W
I.D.
Min.
(in.)
O.D.
Max.
(in)
.062±.005 1.57 .018 .044 .085 .300 2.50
.070±.005 1.78 .022 .048 .097 .300 5.50
.077±.005 1.96 .022 .055 .104 .480 5.50
.080±.005 2.03 .022 .058 .107 .480 5.50
.093±.005 2.36 .025 .068 .123 .480 10.0
.098±.005 2.49 .025 .073 .128 .480 10.0
.100±.005 2.54 .025 .075 .130 .480 10.0
.103±.005 2.62 .025 .078 .133 .480 10.0
.107±.005 2.72 .028 .079 .140 .500 10.0
.110±.005 2.79 .030 .080 .145 .500 10.0
.115±.005 2.92 .030 .085 .150 .500 10.0
.118±.005 3.00 .030 .088 .153 .500 10.0
.122±.005 3.10 .030 .092 .157 .500 10.0
.125±.005 3.18 .030 .095 .160 .500 20.0
.135±.006 3.43 .030 .105 .170 .500 20.0
.139±.006 3.53 .030 .109 .174 .500 20.0
.148±.006 3.76 .032 .116 .188 .750 20.0
.157±.006 3.99 .032 .125 .197 .750 25.0
.165±.006 4.19 .032 .133 .205 1.00 25.0
.170±.006 4.32 .035 .135 .213 1.00 25.0
.177±.006 4.50 .037 .140 .222 1.00 25.0
.185±.008 4.70 .040 .145 .233 1.00 25.0
.194±.008 4.93 .040 .154 .242 1.10 25.0
.210±.008 5.33 .045 .165 .263 1.10 ANY
.220±.010 5.59 .047 .173 .275 1.25 ANY
.225±.010 5.72 .047 .178 .280 1.50 ANY
.236±.010 5.99 .047 .189 .291 1.50 ANY
.250±.010 6.35 .050 .200 .308 1.75 ANY
.275±.010 6.99 .050 .225 .333 2.25 ANY
.296±.010 7.52 .055 .241 .359 3.00 ANY
.315±.010 8.00 .060 .255 .385 3.25 ANY
.335±.015 8.51 .065 .270 .410 3.50 ANY
.355±.015 9.02 .065 .290 .430 3.75 ANY
.378±.015 9.53 .070 .305 .455 4.00 ANY
.395±.015 10.03 .075 .320 .480 4.00 ANY
.433±.015 11.00 .080 .353 .523 7.25 ANY
.475±.015 12.07 .085 .390 .570 8.00 ANY
.500±.015 12.70 .100 .400 .615 12.0 ANY
.550±.025 13.97 .110 .440 .675 12.0 ANY
.590±.025 14.99 .125 .465 .730 15.0 ANY
.625±.025 15.88 .125 .500 .765 15.0 ANY
.750±.035 19.05 .200 .550 .965 18.0 ANY
.787±±.035 19.99 .225 .562 1.027 25.0 ANY
.100±±.050 25.40 .250 .750 1.265 37.0 ANY
Teflon Encapsulated O-Rin의 강점
Completely Enclosed Core Energizer
Chemically Inert Live Seal
High Compression Set Resistance
Smooth Surface
Uniform Diameters and Cross Sections
Virtually Unlimited Range of Inch and Metric Sizes
테프론 캡슐 오링 적용부위
Typical Applications
Mechanical Seals Reusable Syringes Low Pressure, Quick
Face Flange Seals
Seals in Diaphragm Pumps Air-Operated Vents    Disconnect Piping Systems Glass Heat Exchanger
Cryogenics Gas Service Relied and Emergency Valves    Tube/Tubesheet Seals
Mechanical Pumps Corrosive Fluid Seals Large Diameter Access Covers Dairy and Beverage Service
Filter Elements High Purity Water Pressure Vessels  
Filter Housings Vacuum Service Compressors  



품질검사
- 3D 전수검사를 통하여 무결점 오링을 제공하고 있습니다.
품질보증 : Certificate to ISO9001 and ISO9002 (ISO9001.2000 from 01/01/05) 제공 가능합니다.
의약품, 식품분야에도 안전합니다.
- Food and Drug FDA administration Title 21 Regulation 177.1550 (Certificate of conformance 제공 가능합니다.)
재고보유(STOCK-HOLDING)
-
AS568 Series 규격에 대한 재고를 상시 보유하고 있습니다. 아울러 P, G, V Series, 비규격 Size에 대한 최상의 납기를 제공하고 있습니다.
테프론 캡슐 오링은 I.D Size가 정확한지, 이음새 부위(Weld Area)가 돌출되거나 거칠지 않은지 확인하십시오.
하자의 원인이 됩니다.









Square, Rectangular FEP/SIL.VIT Gaskets for Kamlock® Couplings
Coupling
Nominal Size
Dimensions
Inches mm
Inches mm A B C A B C
0.500˝ 12.70 1.024˝ 0.669˝ 0.157˝ 26.0 17.0 4.00
0.750˝ 19.00 1.375˝ 0.875˝ 0.218˝ 35.0 22.2 5.54
1.000˝ 25.40 1.563˝ 1.063˝ 0.250˝ 39.5 27.0 6.35
1.250˝ 31.70 1.938˝ 1.359˝ 0.250˝ 49.2 34.5 6.35
1.500˝ 38.00 2.188˝ 1.625˝ 0.250˝ 55.6 41.3 6.35
2.000˝ 50.80 2.625˝ 2.000˝ 0.250˝ 66.7 50.8 6.35
2.500˝ 63.50 3.125˝ 2.375˝ 0.250˝ 79.4 60.3 6.35
3.000˝ 76.30 3.719˝ 3.000˝ 0.250˝ 94.5 76.2 6.35
4.000˝ 101.60 4.875˝ 4.000˝ 0.250˝ 123.6 101.6 6.35
6.000˝ 152.40 7.063˝ 6.000˝ 0.250˝ 179.4 152.4 6.35
F.E.P Encapsulation Thickness
Tolerances : A/B
                   C
= 0.020˝/0.508mm
= +/-0.030˝/0.762mm
= +/-0.010˝/0.254mm

Round Section Kamlock® Gaskets
Coupling
Nominal Size
Dimensions
Inches mm
Inches mm D E D E
0.500˝ 12.70 0.738˝ 0.187˝ 18.75 4.75
0.750˝ 19.00 0.972˝ 0.224˝ 24.70 5.70
1.000˝ 25.40 1.000˝ 0.224˝ 25.40 5.70
1.250˝ 31.70 1.433˝ 0.224˝ 36.40 5.70
1.500˝ 38.00 1.724˝ 0.275˝ 43.81 6.99
2.000˝ 50.80 2.145˝ 0.275˝ 54.48 6.99
2.500˝ 63.50 2.675˝ 0.275˝ 67.95 6.99
3.000˝ 76.30 3.225˝ 0.275˝ 81.92 6.99




Extreme low temperatures make most O-Rings brittle which in turn leads to failure. The Astra seal was created by Aerospace Engineer to combat the harch environments associated with liquid oxygen and the problems involved with sealing in other cold media, such as liquid nitrogen and hydrogen.
Since then the seals have been successfully used in several space shuttle/ rocket launches and a multitude of other applications by organizations such as Boeing, NASA, Lockheed, and the newly founded Space X.
 
Description
The Astra seal is comprised 302 stainless flat wound ribbon spring
encapsulated in either a FEP or PFA jacket to form an O-Ring

Spring Material
ASTM Type 302/AMS 5059

Temperature Range
FEP/Astra : -250℃ to +204℃
PFA/Astra : -250℃ to +260℃

All our products are manufactured through our world class quality system; our quality rating is so high that we achieve a reject rate of less than 0.03%. As always all our products are supported by our excellent levels of customer service, which allow you to improve your profits, increase your market share plus add value to your business. We would welcome any questions or enquiries you have in relation to this product, please contact our customer support team, with any further requests.

Available cross sections and force required to compress(pounds per linear inch)
Cross
Section
squeeze Groove
Depth
Groove
Width
Minimum
ID
Force
Pounds
1.91mm 0.56mm 1.35mm 2.67mm 12.70mm 40
2.40mm 0.61mm 1.78mm 3.18mm 19.05mm 40
2.62mm 0.76mm 1.90mm 3.53mm 19.05mm 45
2.93mm 0.76mm 2.16mm 3.94mm 31.75mm 40
3.00mm 0.76mm 2.24mm 3.96mm 31.75mm 45
3.10mm 0.76mm 2.34mm 4.07mm 31.75mm 50
3.53mm 0.76mm 2.79mm 4.95mm 31.75mm 65
3.76mm 0.84mm 2.92mm 4.95mm 38.10mm 85
4.00mm 0.89mm 3.10mm 5.08mm 38.10mm 70
4.32mm 1.02mm 3.30mm 5.84mm 38.10mm 90
4.50mm 1.02mm 3.48mm 6.02mm 38.10mm 100
4.88mm 1.12mm 3.76mm 6.48mm 44.45mm 110
5.34mm 1.14mm 4.19mm 7.11mm 50.80mm 140
5.59mm 1.14mm 4.44mm 7.37mm 50.80mm 140
5.72mm 1.14mm 4.57mm 7.49mm 50.80mm 150
6.35mm 1.27mm 5.08mm 8.25mm 76.20mm 110
6.99mm 1.27mm 5.71mm 8.89mm 88.90mm 95
8.00mm 1.52mm 6.48mm 9.90mm 101.60mm 80

Excessive stretching must be avoided when installing Astra seals to ensure the coils do not separate.
Astra seals are best used in OD sealing application.
 
 
홈페이지제작환영! 관리자에게메일보내기! 홈페이지제작환영!
위로